Bike Hire Measurements Form

This form illustrates how to measure your current bike setup. The four dimensions you provide will allow us to translate your current position over to the most suitable hire bike we can supply. These measurements have been developed over our 20 years experience and reduce time adjusting your hire bike at the beginning of your trip. You will receive a hire bike with a setup as close as we can to your own bike when you arrive.
Resources you will need
  • A tape measure.
  • Spirit Level - Don't have a spirit level? Substitute with a hard cover book or any other solid flat object that is about A5 size (or around 21 x 15cm)
  • Plumb Bob - Or use piece of string with a weight attached
  • Flat surface, preferably with a wall to lean your bike against
Dimensions you need to provide
Clicking on the input areas of the form below will provide detailed information on taking the appropriate measurements
  • A Measurement - Distance from Floor to Top of Saddle
  • B Measurement - Distance from Floor to Centre of Handlebars (near the stem)
  • C Measurement - Distance from Front of Saddle to centre of Handlebars
  • D Measurement - Distance from Centre of Bottom Bracket to Front of Seat
If you have trouble understanding measurements please look at our Detailed Bike Measurement Instructions
Other dimensions that may be useful
  • Preferred Crank length
  • Bottom bracket height (distance from floor to centre of bottom bracket)
Bike Frame

Your Booking

Some details about your own bike

Measurements to match your Hire Bike

Clicking on each cell displays detailed information about how to take the measurement. If you have trouble understanding measurements please look at our Detailed Bike Measurement Instructions

Additional Information

  Tick the box to accept the Bicycle rental Conditions

2016 TDU Fan Cam

Follow a day at the Tour Down Under.
mpu

Proudly Supported by Morgan Blue

Navigation